Description
AUDWAVE / Z SERIES
Thoughtful construction.
Flexible placement.
P8Z3 Universal Power Cable
A hand-built power cable combining oxygen-free copper conductors, Audwave’s eight-wire ground-filtering construction and Level 3 vibration absorption.
Designed as a versatile choice for audio-system power connections, with a flexible construction that holds its arranged shape.
01 / THE CONDUCTOR
Copper
at the core.
P8Z3 uses 2.5 mm² oxygen-free, multistrand copper conductors. The flexible multistrand construction helps with routing behind your equipment.
02 / GROUND WIRE FILTERING
Eight wires.
A dedicated geometry.
The GWF construction incorporates eight 0.2 mm² wires arranged using Audwave’s ground-wire geometry. It is designed to help dissipate noise through ground conditioning.
GWF complements proper system grounding. It does not replace the protective earth connection or correct grounding faults.
CONSTRUCTION / A CLOSER LOOK
See the layers.
Inside P8Z3.
A close-up of the cable cross-section shows the conductors, insulation and fibrous material layers beneath the outer sleeve.
03 / VIBRATION ABSORPTION
Level 3.
Built into the cable.
Layers incorporating natural cotton and linen form part of Audwave’s vibration-absorption construction.
Level 3 uses additional layers in a denser arrangement than the earlier levels, with the aim of reducing mechanical vibration transmission through the cable.
04 / FORM MEMORY
Route it.
Shape it.
Keep it in place.
P8Z3 can retain its arranged shape, helping you route the power cable around your system and away from signal cables.
Use gentle curves and leave enough slack to avoid strain on equipment sockets.
05 / HAND-BUILT
Assembled
by hand.
Each cable is assembled by hand, combining the conductor arrangement, vibration-absorption layers and connectors in one finished cable.
06 / TECHNICAL DETAILS
The specifications.
At a glance.
1.6 m length, gold-plated connector contacts and a multistrand copper construction.
| Length | 1.6 m |
|---|---|
| Conductors | Oxygen-free multistrand copper, 2.5 mm² |
| GWF wires | 8 × 0.2 mm² |
| Vibration absorption | Level 3 |
| Form memory | Yes |
| Connector contacts | Gold-plated |
| IEC connector rating | 10 A |
| Wall plug rating | 16 A / 250 V |
| Assembly | Handmade |
